|
Compaq - UPS ( rack-mountable ) - AC 220 V - 6 kW at Backoffice
Compaq - UPS ( rack-mountable ) - AC 220 V - 6 kW 347207-B31
|
 This product is no longer available.
|
Rated at 6000VA/6000W, the Compaq R6000 UPS achieves a unity power rating. As a unity rated UPS, the Compaq R6000 delivers more true power - as measured in Watts - than non-unity rated UPSs. The Compaq R6000 UPS delivers more accurate load qualification, allowing you to support a greater number of today's enterprise computing Power Factor Corrected (PFC) equipment.The Compaq R6000 occupies only 6U (10.5 inches) of valuable rack real estate. The state-of-the art power processing system design of the Compaq R6000 has an unsurpassed power density of 1kW per 1U of rack space. The Compaq R6000 UPS incorporates Enhanced Battery Management-an exclusive, patented technology that doubles battery service life, optimizes battery recharge time, and provides advance notice of pending battery failure. With Enhanced Battery Management, you have a lower total cost of ownership and receive the best in the industry protection for your critical equipment. The Compaq R6000 UPS is equipped with hot-swappable batteries, so you can replace batteries without powering down the connected equipment. The rack-mounted Extended Runtime Modules occupy 3U (5.25 inches) of rack space. The Compaq R6000 UPS supports up to two Extended Runtime Modules. Compaq UPS option cards seamlessly integrate into the back bezel of your Compaq R6000 UPS. The Compaq Multi-Server Card facilitates direct communication with up to three servers, eliminating the need for multiple UPSs. The Compaq Scalable Card enables multiple UPSs to work together and to be monitored as one logical UPS providing scalability and field upgradeability. Equipped with two option slots, the Compaq R6000 UPS can support the Compaq Multi-Server and Scalable Cards simultaneously. With five load segments, you have the flexibility to configure scheduled startups and shutdowns, as well as independently control separate load segments. With the bundled Compaq Power Management Software, the Compaq R6000 UPS can be configured to extend the runtime for more critical devices. Backed by extensive testing, product improvement and an unsurpassed warranty, you are guaranteed the highest level of system protection and performance with your Compaq R6000 UPS. It supports V.42, MNP 2-4, MNP 10, MNP 10EC, and V.42bis/MNP 5, providing the most advanced error correction and data compression available.Product Description | Compaq UPS - 6 kW | Product Description | HP UPS R6000 - UPS - 6000 VA | Device Type | UPS - rack-mountable | Device Type | UPS - rack-mountable | Rack Size | 6U | Dimensions (WxDxH) | 43.8 cm x 65.4 cm x 26.8 cm | Weight | 136 kg | Dimensions (WxDxH) | 43.8 cm x 65.4 cm x 26.8 cm | Weight | 136 kg | Input Voltage | AC 220 V | Output Voltage | AC 220 V ± 10% | Input Voltage | AC 200/208/220/230/240 V | Output Voltage | AC 200/208/220/230/240 V ± 10% ( 50/60 Hz ) | Power Provided | 6 kW | Output Connector(s) | Power | Power Provided | 6000 VA | Output Connector(s) | 15 x power IEC 320 | Battery | Lead Acid expandable | Batteries Qty | 3 (installed) / 3 (max) | Battery | Lead Acid | Manufacturer Warranty | 3 years warranty | Battery Form Factor | Plug-in module | Run Time (Up To) | 7 min at full load |
GENERAL |
Device Type | UPS - rack-mountable |
Device Type | UPS - rack-mountable |
Battery Enclosure Type | Plug-in module |
Width | 43.8 cm |
Depth | 65.4 cm |
Height (Rack Units) | 6U |
Width | 43.8 cm |
Height | 26.8 cm |
Weight | 136 kg |
Depth | 65.4 cm |
Height | 26.8 cm |
POWER DEVICE |
Input Voltage | AC 220 V |
Input Voltage Margin | ± 20% |
GENERAL |
Weight | 136 kg |
POWER DEVICE |
Frequency Required | 50/60 Hz |
Input Voltage | AC 200/208/220/230/240 V |
Input Voltage Range | AC 160 - 288 V |
Input Connector(s) | Power |
Output Voltage | AC 220 V ± 10% |
Input Voltage Margin | ± 20% |
Frequency Required | 45 - 65 Hz |
Output Connector(s) | Power |
Power Provided | 6 kW |
Input Connector(s) | 1 x hardwire |
Output Voltage | AC 200/208/220/230/240 V ± 10% ( 50/60 Hz ) |
Surge Suppression | Standard |
BATTERY |
Type | Expandable |
POWER DEVICE |
Output Connector(s) | 15 x power IEC 320 |
Power Provided | 6000 VA |
BATTERY |
Quantity | 3 (installed) / 3 (max) |
POWER DEVICE |
Output Waveform | Sinewave |
BATTERY |
Technology | Lead Acid |
Recharge Time | 48 hour(s) |
POWER DEVICE |
Surge Suppression | Standard |
Circuit Protection | Circuit breaker |
EXPANSION / CONNECTIVITY |
Connections | 2 x serial - RS-232 |
MISCELLANEOUS |
Equipment Protection Value | 25000 US Dollars |
BATTERY |
Technology | Lead Acid |
Run Time (Up To) | 7 min at full load |
MANUFACTURER WARRANTY |
Service & Support | 3 years warranty |
Service & Support Details | Limited warranty - parts and labour - 3 years - on-site |
BATTERY |
Recharge Time | 3 hour(s) |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 10 °C |
EXPANSION / CONNECTIVITY |
Interfaces | 2 x serial |
MISCELLANEOUS |
Equipment Protection Value | 25000 US Dollars |
ENVIRONMENTAL PARAMETERS |
Max Operating Temperature | 40 °C |
Min Storage Temperature | 0 °C |
MISCELLANEOUS |
Compliant Standards | FCC Class B certified, CE, CSA, UL, VCCI, EN 60950 |
ENVIRONMENTAL PARAMETERS |
Max Storage Temperature | 25 °C |
Min Operating Temperature | 10 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 20 - 80% |
Humidity Range Storage | 5 - 95% |
Min Storage Temperature | 0 °C |
Max Storage Temperature | 25 °C |
Sound Emission | 55 dB |
Humidity Range Operating | 20 - 80% |
Humidity Range Storage | 5 - 95% |
Sound Emission | 55 dBA |
|
|
|