|
|
NETGEAR ProSafe FSM7352S - Switch - 48 ports - EN, Fast EN - 10Base-T, 100Base-TX + 4x10/100/1000Base-T/SFP (mini-GBIC) - 1U at Backoffice
NETGEAR ProSafe FSM7352S - Switch - 48 ports - EN, Fast EN - 10Base-T, 100Base-TX + 4x10/100/1000Base-T/SFP (mini-GBIC) - 1U
FSM7352SEU
|
This product is no longer available.
|
NETGEAR's low-cost, stackable, Fast Ethernet switch delivers maximum throughput and flexibility where you need it - to high-density workgroups at the edge of the network, or in the backbone of small networks. The ProSafe FSM7352S is a managed 48-port switch with auto-sensing 10/100 ports and four 10/100/1000 ports. This enables fiber connectivity through four hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces. The non-blocking design of the switch delivers simultaneous, full wire-speed, low-latency throughput to all ports. In addition, the 1U rack-mount form factor uses less rack space and provides a lower per-port cost than comparable Fast Ethernet switches.| Product Description | NETGEAR ProSafe FSM7352S - switch - 48 ports | | Device Type | Switch | | Form Factor | External - 1U | | Dimensions (WxDxH) | 44 cm x 25.7 cm x 4.3 cm | | Weight | 3.2 kg | | RAM | 128 MB | | Flash Memory | 16 MB | | Ports Qty | 48 x Ethernet 10Base-T, Ethernet 100Base-TX | | Data Transfer Rate | 100 Mbps | | Data Link Protocol | Ethernet, Fast Ethernet | | Auxiliary Network Ports | 4x10/100/1000Base-T/SFP (mini-GBIC) | | Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP | | Features | Layer 3 switching, DHCP support, auto-negotiation, BOOTP support, VLAN support, auto-uplink (auto MDI/MDI-X), manageable, Broadcast Storm Control | | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s | | Power | AC 120/230 V ( 50/60 Hz ) | | Manufacturer Warranty | NETGEAR lifetime warranty |
GENERAL |
| Device Type | Switch |
| Enclosure Type | External - 1U |
| Width | 44 cm |
| Depth | 25.7 cm |
| Height | 4.3 cm |
| Weight | 3.2 kg |
MEMORY |
| RAM | 128 MB |
| Flash Memory | 16 MB |
NETWORKING |
| Ports Qty | 48 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports | 4x10/100/1000Base-T/SFP (mini-GBIC) |
| Data Transfer Rate | 100 Mbps |
| Data Link Protocol | Ethernet, Fast Ethernet |
| Routing Protocol | RIP-1, RIP-2, IGMPv2, IGMP |
| Remote Management Protocol | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
| Connectivity Technology | Wired |
| Switching Protocol | Ethernet |
| Features | Layer 3 switching, DHCP support, auto-negotiation, BOOTP support, VLAN support, auto-uplink (auto MDI/MDI-X), manageable, Broadcast Storm Control |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
EXPANSION / CONNECTIVITY |
| Expansion Slots Total (Free) | 4 ( 4 ) x SFP (mini-GBIC) |
| Interfaces | 48 x network - Ethernet 10Base-T/100Base-TX - RJ-45
1 x management - RS-232 - 9 pin D-Sub (DB-9)
4 x network - Ethernet 1000Base-T - RJ-45 |
MISCELLANEOUS |
| Rack Mounting Kit | Included |
| MTBF | 117,747 hour(s) |
| Encryption Algorithm | TLS 1.0, SSL 3.0 |
| Authentication Method | RADIUS |
| Compliant Standards | CE, FCC Class A certified, C-Tick, VCCI Class A ITE, EN 55020 |
POWER |
| Power Device | Power supply - internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 80 Watt |
SOFTWARE / SYSTEM REQUIREMENTS |
| Software Included | Drivers & Utilities |
MANUFACTURER WARRANTY |
| Service & Support | NETGEAR lifetime warranty |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 0 - 90% |
|
|
|
