Information and Communication Technologies
Country
Prices in
VAT
IBM - Switch - 4 ports - Gigabit EN - plug-in module at Backoffice

IBM - Switch - 4 ports - Gigabit EN - plug-in module
13N0568


This product is no longer available.
The IBM eServer BladeCenter 4-port Gigabit Ethernet Switch Module (13N0568) is a Layer 2 Ethernet Switch module that provides filtering and Virtual Local Area Networks (VLAN) capability. This switch module can be installed in the IBM eServer BladeCenter Chassis type 8677. This option replaces the 4-port Gigabit Ethernet Switch Module (48P7054). Now, up to four high-performance Layer 2 Ethernet switch modules can be installed in a BladeCenter chassis. The IBM eServer BladeCenter Gigabit Ethernet Expansion Card is required if this option is installed in BladeCenter switch module bays 3 and/or 4. Installation of an Ethernet switch in switch module bays 3 and/or 4 excludes the use of Fiber Channel switches. This option (13N0568) is functionally compatible with the Option (48P7054). Switch firmware for these options supports both option part numbers and both option part numbers can reside in the same BladeCenter chassis. The total allowable configurations never exceeds a maximum of four switches and the option (48P7054) can not exceed a maximum of two, located in switch module bays 1 and/or 2. Dongle cables shipped with the option (48P7054) are not required or shipped for the option (13N0568). From time to time, new firmware-based functions will be available for both option part numbers. As an example, Trunk Failover will be available March 1, 2004. Firmware updates will be available via the IBM product support Web site. Total loss of link connectivity on external Ethernet Switch Module ports can not be detected by the blade NIC drivers. A client-selectable option, Trunk Failover is an alternative to spanning tree protocol. This function allows the NIC teaming driver to auto failover to an alternate switch, on loss of link detection, when all links in a trunk are lost.

Product DescriptionIBM switch - 4 ports
Device TypeSwitch
Form FactorPlug-in module
Dimensions (WxDxH)26 cm x 2.9 cm x 11.2 cm
Ports Qty4
Data Transfer Rate1 Gbps
Data Link ProtocolGigabit Ethernet
Manufacturer Warranty3 years warranty

GENERAL

Device TypeSwitch
Enclosure TypePlug-in module
Width26 cm
Depth2.9 cm
Height11.2 cm

NETWORKING

Ports Qty4
Data Transfer Rate1 Gbps
Data Link ProtocolGigabit Ethernet

MISCELLANEOUS

Compliant StandardsCE, FCC Class A certified, C-Tick, CISPR 22 Class A, CSA 22.2 No. 60950

MANUFACTURER WARRANTY

Service & Support3 years warranty
Service & Support DetailsLimited warranty - 3 years

ENVIRONMENTAL PARAMETERS

Min Operating Temperature10 °C
Max Operating Temperature35 °C
Humidity Range Operating8 - 80%
Max Altitude Operating2.1 km