|
|
FUJITSU MAX3147NC - Hard drive - 147 GB - internal - 3.5" - Ultra2 Wide SCSI - 80 pin Centronics (SCA-2) - 15000 rpm - buffer: 8 MB at Backoffice
FUJITSU MAX3147NC - Hard drive - 147 GB - internal - 3.5" - Ultra2 Wide SCSI - 80 pin Centronics (SCA-2) - 15000 rpm - buffer: 8 MB
MAX3147NC
|
This product is no longer available.
|
Fujitsu's latest generation of 15K Enterprise SCSI Hard Disk Drives offer capacities of up to 147GB in a 1-inch high, 3.5-inch form factor. The MAX SCSI series is the latest generation Hard Disk products from Fujitsu offering low profile, high speed and high capacity to high performance enterprise computing applications. The MAX NC/NP series supports the Ultra 320 SCSI (320MB/s) interface, which offers new performance and reliability enhancing features such as data packet protocol, quick arbitration and selection, and signal pre-compensation. Leading edge technology enables industry leading performance specifications blended with the latest advances in interface technology, to provide a cost effective storage solution that meets the most demanding enterprise storage requirements.| Product Description | FUJITSU MAX3147NC - hard drive - 147 GB - Ultra2 Wide SCSI | | Type | Hard drive - internal | | Form Factor | 3.5" x 1/3H | | Dimensions (WxDxH) | 10.2 cm x 14.6 cm x 2.5 cm | | Weight | 0.7 kg | | Capacity | 147 GB | | Interface Type | Ultra2 Wide SCSI LVD | | Connector | 80 pin Centronics (SCA-2) | | Data Transfer Rate | 80 MBps | | Average Seek Time | 3.3 ms | | Spindle Speed | 15000 rpm | | Buffer Size | 8 MB | | Manufacturer Warranty | 5 years warranty |
GENERAL |
| Device Type | Hard drive - internal |
| Width | 10.2 cm |
| Depth | 14.6 cm |
| Height | 2.5 cm |
| Weight | 0.7 kg |
HARD DRIVE |
| Form Factor | 3.5" x 1/3H |
| Capacity | 147 GB |
| Interface Type | Ultra2 Wide SCSI |
| Connector | 80 pin Centronics (SCA-2) |
| SCSI Signalling Type | Low Voltage Differential (LVD) |
| Buffer Size | 8 MB |
PERFORMANCE |
| Drive Transfer Rate | 80 MBps (external) |
| Seek Time | 3.3 ms (average) / 9 ms (max) |
| Average Latency | 2 ms |
| Spindle Speed | 15000 rpm |
RELIABILITY |
| MTBF | 1,200,000 hour(s) |
| Non-Recoverable Errors | 1 per 10^15 |
| Seek Errors | 10 per 10^8 |
EXPANSION / CONNECTIVITY |
| Compatible Bays | 1 x internal - 3.5" x 1/3H |
MANUFACTURER WARRANTY |
| Service & Support | 5 years warranty |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 5 °C |
| Max Operating Temperature | 55 °C |
|
|
|
