|
Enterasys Matrix C2 Gigabit Stackable Switch C2G134-24P - Switch - 24 ports - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T + 4 x shared SFP (empty) - PoE - stackable at Backoffice
Enterasys Matrix C2 Gigabit Stackable Switch C2G134-24P - Switch - 24 ports - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T + 4 x shared SFP (empty) - PoE - stackable C2G134-24P
|
This product is no longer available.
|
The C2G134-24P is a stackable switch that can be adapted and scaled to help meet your network requirements. This switch provides a management platform and an uplink to a network backbone for a stacked group of up to eight C2 Series switches.The switch also supports the use of a redundant DC power supply to help prevent downtime due to an internal power supply failure in the switch or AC power source.You can install the switch on a flat surface or into a standard 19-inch rack with user supplied mounting hardware, and configure the switch functions using the WebView application, CLI switching commands, and/or SNMP.Product Description | Enterasys Matrix C2 Gigabit Stackable Switch C2G134-24P - switch - 24 ports | Device Type | Switch - stackable | Form Factor | External | Dimensions (WxDxH) | 44.1 cm x 36.9 cm x 4.4 cm | Weight | 6.5 kg | Processor | MPC8245 400 MHz | RAM | 256 MB | Flash Memory | 32 MB | Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T | Data Transfer Rate | 1 Gbps | Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet | Empty Slots | 4 x shared SFP (mini-GBIC) | Remote Management Protocol | Telnet, HTTP | Features | Flow control, uplink, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, port mirroring, DiffServ support, manageable, stackable, Weighted Round Robin (WRR) queuing | Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1x, IEEE 802.1s | Power Over Ethernet (PoE) | Yes | Power | AC 120/230 V ( 50/60 Hz ) | Manufacturer Warranty | Limited lifetime warranty |
GENERAL |
Device Type | Switch - stackable |
Enclosure Type | External |
Width | 44.1 cm |
Depth | 36.9 cm |
Height | 4.4 cm |
Weight | 6.5 kg |
PROCESSOR |
Processor | MPC8245 : 400 MHz |
MEMORY |
RAM | 256 MB |
Flash Memory | 32 MB |
NETWORKING |
Ports Qty | 24 x Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T |
Data Transfer Rate | 1 Gbps |
Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
Remote Management Protocol | Telnet, HTTP |
Connectivity Technology | Wired |
Switching Protocol | Ethernet |
Features | Flow control, uplink, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, port mirroring, DiffServ support, manageable, stackable, Weighted Round Robin (WRR) queuing |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.1x, IEEE 802.1s |
EXPANSION / CONNECTIVITY |
Expansion Slots Total (Free) | 4 ( 4 ) x SFP (mini-GBIC) |
Interfaces | 4 x network / power - Ethernet 10Base-T/100Base-TX/1000Base-T - 50 PIN Telco 1 x management - console - 9 pin D-Sub (DB-9) 2 x network stack device |
MISCELLANEOUS |
MTBF | 145,462 hour(s) |
Compliant Standards | EN 60950, EN 61000-3-2, EN55022, IEC 60950, EN 61000-3-3, EN55024, UL 60950, CSA 22.2 No. 60950 |
POWER |
Power Over Ethernet (PoE) | Yes |
Power Device | Power supply - internal |
Voltage Required | AC 120/230 V ( 50/60 Hz ) |
Features | Redundant Power System (RPS) connector |
MANUFACTURER WARRANTY |
Service & Support | Limited lifetime warranty |
Service & Support Details | Limited warranty - lifetime |
ENVIRONMENTAL PARAMETERS |
Min Operating Temperature | 5 °C |
Max Operating Temperature | 40 °C |
Humidity Range Operating | 5 - 90% |
|
|
|