|
|
Infortrend EonStor A12F-G2422 - Hard drive array - 12 bays ( SATA-300 ) - 0 x HD - 4Gb Fibre Channel (external) - rack-mountable - 2U at Backoffice
Infortrend EonStor A12F-G2422 - Hard drive array - 12 bays ( SATA-300 ) - 0 x HD - 4Gb Fibre Channel (external) - rack-mountable - 2U
A12F-G2422-M2
|
This product is no longer available.
|
Infortrend is an industry-leading manufacturer of multi-platform high performance RAID controllers and subsystems. Since its founding in 1992, Infortrend has excelled in developing leading-edge storage solutions, which provide exceptional levels of performance and fault tolerance, in addition to cost-effectiveness. PRODUCT FEATURES: FC-4G to SATA-II single controller RAID subsystem; RAID5 configuration end-to-end I/O performance; Sequential read: 545 MB/sec; Sequential write: 345 MB/sec; Dual-speed fans to reduce noise; 2U chassis providing up to 6TB of storage capacity; SATA NCQ support.| Product Description | Infortrend EonStor A12F-G2422 - hard drive array | | Device Type | Hard drive array | | Enclosure Type | Rack-mountable - 2U | | Interface | 4Gb Fibre Channel | | Host Channels | 2 | | Maximum LUNs | 1024 | | Installed Devices / Modules Qty | 0 (installed) / 12 (max) | | Supported Drives | Serial ATA-300 | | Dimensions (WxDxH) | 44.6 cm x 50.5 cm x 8.8 cm | | Weight | 23.5 kg | | Built-in Devices | Status LCD | | Storage Controller | RAID ( Serial ATA-300 ) - RAID 0, 1, 3, 5, 10, 30, 50, JBOD, n, 0+1 | | Hard Drive | 0 hot-swap | | Power | AC 120/230 V ( 50/60 Hz ) | | Power Redundancy | Built-in |
GENERAL |
| Device Type | Hard drive array |
| Enclosure Type | Rack-mountable - 2U |
| Width | 44.6 cm |
| Depth | 50.5 cm |
| Height | 8.8 cm |
| Weight | 23.5 kg |
CABINET (CHASSIS) |
| Built-in Devices | Status LCD |
| Installed Devices / Modules Qty | 0 |
| Supported Devices / Modules Qty | 12 |
| Supported Drives | Serial ATA-300 |
STORAGE |
| HDD Array External Interface | 4Gb Fibre Channel |
| Host Channels | 2 |
| Maximum LUNs | 1024 |
PROCESSOR |
| Type | 600 MHz |
STORAGE CONTROLLER |
| Type | RAID ( 4Gb Fibre Channel ) |
| Data Transfer Rate | 300 MBps |
| Controller Interface Type | Serial ATA-300 |
| Cache / Buffer Size ( Max ) | 256 MB |
| Supported Devices | Hard drive, disk array (RAID) |
| RAID Level | RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, RAID 30, RAID 50, JBOD, RAID n, RAID 0+1 |
STORAGE HARD DRIVE |
| Type | Hot-swap - plug-in module |
| Capacity | 0 |
EXPANSION / CONNECTIVITY |
| Expansion Bays Total (Free) | 12 ( 12 ) x hot-swap - 3.5" x 1/3H |
| Expansion Slots Total (Free) | Memory
2 SFP (mini-GBIC) |
| Interfaces | 1 x serial RS-232C ( management )
1 x Ethernet 10Base-T/100Base-TX ( management ) - RJ-45 |
MISCELLANEOUS |
| Compliant Standards | CE, cUL, CB, FCC, RoHS |
POWER |
| Power Device | 2 x power supply - hot-plug - plug-in module |
| Max Supported Qty | 2 |
| Power Redundancy | Built-in |
| Power Redundancy Scheme | 1+1 |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Provided | 350 Watt |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 95% |
|
|
|
