|
|
Allied Telesis SwitchBlade AT SBx908 - Switch - 3U - rack-mountable - stackable at Backoffice
Allied Telesis SwitchBlade AT SBx908 - Switch - 3U - rack-mountable - stackable
AT-SBX908-00
|
This product is no longer available.
|
The Allied Telesis SwitchBlade x908 industry leading modular switch incorporates eight high-speed 30Gbps expansion bays, delivering a new generation of high performance. The SwitchBlade x908 provides scalable and versatile switching solutions for today's Enterprise networks. The highly configurable SwitchBlade x908 3RU modular switch incorporates an advanced IPv4 L3 feature set with wire-speed IPv6 hardware capability, future proofing the network. The SwitchBlade x908 incorporates the AlliedWare Plus Operating System, using an industry standard Command Line Interface (CLI), facilitating effortless manageability. Featuring dual hot-swap PSUs, an advanced QoS feature set, multicasting support, and LAN resiliency support, the SwitchBlade x908 also provides Service Provider capabilities such as a large L3 route table, and EPSR support. Stacking between two units is supported via fixed stacking connectors on the rear of the chassis, providing 80Gbps of stacking bandwidth. Stacking of more than two units is via expansion modules (XEMs) on the front panel. Configurable up to 96 gigabit with PoE1 or up to 16 x 10GbE2 ports. The XEMs are compatible with the x900-24X and x900-12XT/S. The SwitchBlade x908 incorporates the AlliedWare Plus Operating System, using an industry standard Command Line Interface (CLI), facilitating effortless manageability.| Product Description | Allied Telesis SwitchBlade AT SBx908 - switch | | Device Type | Switch - stackable | | Form Factor | Rack-mountable - 3U | | Dimensions (WxDxH) | 44 cm x 45.5 cm x 13.3 cm | | Weight | 14.3 kg | | RAM | 512 MB DDR SDRAM | | Flash Memory | 32 MB | | Remote Management Protocol | SNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, SNMP 3 | | Features | Modular design, hot swap module replacement, Layer 3 switching, Layer 2 switching, dynamic IP address assignment , DHCP support, BOOTP support, RARP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS) | | Compliant Standards | IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v |
GENERAL |
| Device Type | Switch - stackable |
| Enclosure Type | Rack-mountable - 3U |
| Installed Modules Qty (Max) | 0 (installed) / 8 (max) |
| Width | 44 cm |
| Depth | 45.5 cm |
| Height | 13.3 cm |
| Weight | 14.3 kg |
MEMORY |
| RAM | 512 MB DDR SDRAM |
| Flash Memory | 32 MB Flash |
NETWORKING |
| Max Units In A Stack | 4 |
| Routing Protocol | OSPF, RIP, BGP-4, RIP-2, IGMPv2, VRRP, OSPFv2, PIM-SM, Multiprotocol BGP, ECMP |
| Remote Management Protocol | SNMP 2, RMON 1, RMON 2, SNMP, RMON 3, RMON 9, Telnet, SNMP 3 |
| Connectivity Technology | Wired |
| Switching Protocol | Ethernet |
| Features | Modular design, hot swap module replacement, Layer 3 switching, Layer 2 switching, dynamic IP address assignment , DHCP support, BOOTP support, RARP support, ARP support, VLAN support, IGMP snooping, Syslog support, port mirroring, DiffServ support, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS) |
| Compliant Standards | IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1v |
EXPANSION / CONNECTIVITY |
| Expansion Slots Total (Free) | 8 ( 8 ) x Expansion Slot
1 ( 1 ) x SD Memory Card |
| Interfaces | 1 x network stack device x 2
1 x management - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x management - console |
MISCELLANEOUS |
| MTBF | 150,000 hour(s) |
| Encryption Algorithm | DES, Triple DES, SHA, MD5, TLS, DH, SHA-1, SSL 3.0, SSL 2.0 |
| Authentication Method | Secure Shell (SSH), RADIUS |
| Compliant Standards | FCC Class A certified, UL, TUV, cUL, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950-1, EN 60950-1, CSA C22.2 No. 60950-1-03 |
POWER |
| Power Device | Power supply - hot-plug / redundant - plug-in module |
| Installed Qty | 0 (installed) / 2 (max) |
ENVIRONMENTAL PARAMETERS |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 40 °C |
| Humidity Range Operating | 5 - 80% |
|
|
|
